Negotiable
The date of payment from buyers deliver within days
Zhejiang
Long-term effective
2023-04-04 00:42
432
zjzgjx(Mr.)
Zhejiang
No.15 North Bailing Avenue, Qujiang District, Quzhou City, Zhejiang Province, China
http://www.zegadrillrig.com/ http://zjzgjx.lightertrade.com/
Separated DTH Surface Drill Rigs ZEGA D355C is widely used in various mines and rock excavation projects such as national defense, transportation, hydropower station and so on. It has the characteristics of compact structure, convenient operation, simple maintenance, low energy consumption and high efficiency.
Â
Hole Diameter Range: Φ115-152 mm
Â
Â
Separated Drill Rigs ZEGA D355C drill rig is a new type of high-efficiency and widely applicable rock drilling equipment that has been independently developed and manufactured after long market research. It is equipped with a low-speed high-torque hydraulic motor and a 18 MPa hydraulic system, which can be applied to various impact hammers of low, medium and high pressure. It is widely used in mining and national defense, transportation, hydropower and other rock excavation projects. The drilling rig has compact structure for easy operation, easy maintenance, low energy consumption and high efficiency, which greatly reduces the cost of compressed air in the rock drilling process. The drilling rig can travel alone without the power of the air compressor, which is a new type of ideal rock drilling equipment that is popular among users.
Â
Â
Â
Â
Usually used in various mines and rock excavation projects such as national defense, transportation, hydropower station and so on.
Â
Â
Â
Â
Engine manufacturer |
Yuchai |
Pull up force |
25 kN |
Engine model |
YC4DK100 |
Feed force |
25 kN |
Engine rated power |
73.5 kW |
Feed tilt |
Turn over 180° |
Working air pressure |
0.7 - 2.5 Mpa |
Feed swing |
Left 50°,Right 50°/ Left 15°,Right 95° |
Air consumption rate |
10 - 20 m³ / min |
Boom tilt |
Upwards 48°, Downwards 37° |
Drilling rock hardness |
F=6-20 |
Boom swing |
Left 47°, Right 27° |
Hole diameter range |
Φ115 - 152 mm |
Track oscillation |
±10° |
Rotation torque |
3,500 N.m |
Gradeability |
25° |
Hole depth |
30 m |
Ground clearance |
350 mm |
Feed travel length |
3,890 mm |
Weight |
7,340 kg |
Drill pipe length |
3,000 mm |
Length |
7,000 mm |
Drill rod diameter |
Φ76 mm |
Width |
2,300 mm |
Feed extension |
1,220 mm |
Height |
2,800 mm |
Rotation RPM |
65 - 95 rpm |
 |
 |
Â
Â
Dimensions
Dimensions
Â
Â
Drilling Coverage Area
Â
Â
Â
Â
Â
Â
MOQ |
1 SET |
Payment term |
T/T, L/C at sight |
Port |
Ningbo/Shanghai |
Â
Â
Â
Q: What is the fault of the gear transmission breather leaking oil during operation?
A: Remove the oil pump to see which oil seal of the oil pump framework leaks, and replace the oil pump.
Â
Q: How to adjust the propulsion pressure?
A: Push the turning head to the bottom (in the state of resistance) of the empty car, open the switch of the propulsion pressure gauge, and adjust the (4mm inner hexagon) overload valve on the opposite side of the propulsion lever to 8-10Mpa
Â
Q: How to adjust the left travel pressure?
A: Turn on the left travel pressure gauge switch, insert a 2m drill pipe into the guide wheel hole (in the state of resistance), push the left travel handle to adjust the left travel side overflow valve to 16mpa
Â
http://www.zegadrillrig.com/