Model Number: love-a6
Brand Name: love
Key Specifications/Special Features:
Product:Love behalf on science and technology are primary productive forces, is the basic enterprise developmentInsisting on the spirit of the honest, creation and development, dealing with variety and nicety solar products, principle of miracle function and funny out looking, absorbed in quality and developing friendly cooperationService:1. Quality assurance and all tested
2. OEM/ODM service
3. Samples are available and big quantity at stock
4. Good after-sale service
5. Factory directly supply
·no central system to break down
· 5-6 hours on time for 24 hours heating due to mass heating not air.
·50% to 70% electrical bill savings, and we have had cases of 78% over oil boilers.
·extensive reduction in damp/condensation
·healthy heating with no dust or bugs circulating in the air (non convection type heating)
·helps with aching limbs, if you feel better when stepping into the sun, infrared is exactly the same.
· space saving
·low installation costs
·5 year warranty
1.When we go out, dont shut down the thermostat switch, and we can set a lower temperature as 8 to 10 degree, the state of the energy consumption is far less than that 0 degree will be heated to the consumption of 10 degree.
2.When we go back home, Set the thermostat as a normal temperature.
3.We can appropriately fall down the temperature of no one area by the thermostat before you fall sleep.
4.We can lower the temperature by the thermostat to save energy consumption, but don’t turn off the heater if you go out.
5.If the price of electricity is lower, you can increase the system running time to make the temperature of the room higher.
|Toughness of coating
|Boiling water resistance
||boiling for 2 hours, no change
||Immerse surface in 2% HC1 for 24hours, no change
||Immerse surface in 2% NAOH for 24 hours, no change
||Immerse surface in 20# engine oil for 24 hours, no change
||Cleaned 100 times with Dimethylbenzene, no change
||>1000 times no change
||2.4mm/m @1000C Temp difference
|Bending elastic modules
|Heat distortion temperature